Tools and Machines required in Wood Industry

Are you interested in the timber business and want to start a business but still confused to determine and provide any equipment or machine needed? In completing the work properly and on time, a carpenter must be able to distinguish, understand and know what tools and equipment are needed and what will be used for later. One of the most important tools to optimize the work of the carpenters is best framing nailer. In addition, here we provide a list of tools and equipment for carpenters!

1. Roll Meters
It used to measure longer work pieces. Use a meter with a band made of steel to be durable. And if not used the tape will stored in the box.

2. Ruler and Pencil
The ruler used to select with steel or stainless steel material to be strong and not easily broken, durable. For pencils usually, use a special pencil for artisans with larger charcoal shapes. Pencils and rulers are used to mark or line on small wooden fields as a mark of cutting or punching.

3. The Elbow Circuit
The elbow ruler is made of steel consisting of ruler and handle. Use materials made of steel and the handle is thicker and heavier than the leaves for its use more easily and durable. The elbow ruler is used to mark or line so that the wood cutting can form an angle of 90 ° and when mounting can be straight and neat.

4. Wooden hammer
The wood hammer is used to assemble, disassemble the wooden construction and set the slop pegs on the wood media. Also used to hit the chisel so that the tip of the chisel is not damaged. Usually consists of 2 kinds, namely around wood hammer and square that form larger.

5. Iron Hammers
Iron hammers are used for the installation of hard objects or to hit spikes. Use a hammerhead hammer made of the steel material to last longer.

6. Chisel
Use a puncture sculpture that has a sturdy wooden or plastic handle and a flat tip. Its use to make a hole, flatten the hole or pen. For the hammer use a wooden hammers so that the handle of the chisel is not damaged.

7. Wood Saws
There are 2 types of saws according to their function and usage, namely: Saw and chainsaw saws. Cutting saws are used to cut or disconnect wood fibers. It has 45 ° sharpness angle and turns back and forth. While the saws are used to cut wood parallel to the fiber, saws have spans and have 60 ° sharpness.

James W. Wager